Radio shack battery charger 23-2027 user manual

RADIO SHACK BATTERY CHARGER 23 2027 USER MANUAL INSTALL

Set FUNCTION to RADIO to turn on the radio. VOLUME MIN/MAX to its lowest set- ting before you turn on the radio. Radio Shack AM/FM Auto Reverse Cassette 8 RADIO OPERATION Warning: To protect your hearing, set Press STOP/EJECT and close the cassette compartment cover. Use a cotton swab dipped in tape head cleaning solution or denatured alco- hol to gently clean the capstans, pinch rollers, tape guides, and tape heads. Press and hold down the erase-protection tab sensor, then press RECORD to expose the record/playback and erase heads. Remove the batteries or disconnect the AC power

To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning.Radio Shack AM/FM Auto Reverse Cassette 13 2.

Incorrect assembly can result in a risk of electric shock or fire. Have it serviced by qualified service personnel only. Have it repaired by qualified service personnel.

Never operate the charger if it has received a sharp blow or been dropped or damaged in any way.

Do not expose the charger to rain or excessive moisture.

For AAA batteries: Charge time in hours = the capacity of your battery Р“вЂ”.

For AA batteries: Charge time in hours = the capacity of your battery Р“вЂ”.

To calculate the charge time for your battery, based on its rated capacity, use the following formulas. Note: Batteries will not be damaged by leaving them in the charger until the timer turns it off.

For batteries with less capacity, simply remove batteries before the charge cycle is complete, based on estimated charge times in the following chart. Simply reset the charger to begin a second charge cycle for batteries with larger capacities. The charger can be used to recharge Ni-Cd batteries with capacities greater than 850 mAh and Ni-MH batteries with capacities greater than 1600 mAh. Unplug the charger from the outlet, then remove the batteries or AAA battery adapter(s) from the charger.Р”В¬harging Batteries with Different Capacities When the batteries finish charging, the indicator turns off. The red indicator lights when you are charging Ni-Cd batteries the green indicator lights if you are charging Ni-MH batteries.Р”В¤.

The plug is polarized to fit in the outlet only one way.

Plug the charger into a standard AC outlet. Lift the prongs of the AC plug until the plug snaps into place.

RADIO SHACK BATTERY CHARGER 23 2027 USER MANUAL INSTALL

Note: The charger does not charge if you install two AA or AAA batteries intoР”Р€.

Then install the battery adapter into BAY 1 with the battery contacts facing the top of the bay and the arrow marked on the adapter pointing To charge two Ni-Cd or Ni-MH AAA batteries, install both into the supplied AAA battery adapter as indicated by the polarity symbols (+ and РІР‚вЂњ) marked on the adapter. Note: Both batteries must be installed in the same bay. To charge two Ni-Cd or Ni-MH AA batteries, install both into BAY 1 as indicated by the polarity symbols (+ and РІР‚вЂњ) marked inside the compartment, then slide Ni-Cd/Ni-MH to the appropriate setting. Reverse Polarity Protection - protects the charger and batteries against damage from incorrectly installed batteries.Р”Р„utomatic Timer Shut-Off - turns off the charger to prevent overcharging the batteries.Р”РЋ. Two Charging Indicators - an indicator lights during charging for each battery type (Ni-Cd or Ni-MH), and turns off when charging is complete. Your RadioShack Compact Ni-Cd (nickel cadmium)/Ni-MH (nickel metal hydride) Battery Charger is designed to charge two or four batteries - AA and AAA types.

Radio shack battery charger 23-2027 user manual